A pan damaged during cooking with organic food from https://greenelly.com/ is not uncommon; every housewife who has risked being distracted by her favorite TV series or gadget has probably encountered similar problems. The carbon deposits inside the dishes sometimes seem impossible to remove, but you can still remove it using home remedies. Today, it seems, universal preparations have not yet been invented, especially since each type of pan has its own method.
What methods are considered the most effective?
There are proven ways to clean carbon deposits from different types of containers using home remedies that are always at hand. There is no need to run to the store, especially since it often happens that the dishes are needed urgently, but they look obscene.
Regular soap or dishwashing solution
This solution is suitable for products made of aluminum, stainless steel or enamel. Soap or dishwashing liquid is poured into a pan along with boiling water, after which the container is placed on the stove over low heat and boiled for 20 minutes. Next, the water is drained and the carbon deposits are removed with a sponge. Naturally, this method will not work if the pan is very burnt, or if it will have to be used more than once. It should also be noted that it is better not to rub enamel dishes with the hard side of the sponge – black marks will remain.
Regular table salt
It is important to remember that salt is an abrasive substance, and therefore you need to look at the material from which the pan is made. If it is stainless steel, then just fill the container with cold water and leave for a couple of hours, then pour out the water and pour table salt onto the bottom of the pan. A similar method is suitable for aluminum cookware. An enamel burnt pan is not filled with water; salt is poured into the bottom and left in this state for a couple of hours. Next, the carbon deposits can be easily washed off with a sponge and hot water. In case of severe contamination, the procedure can be repeated.
Vinegar to help the housewife
Nine percent vinegar, which can also be replaced with freshly squeezed lemon juice and citric acid, is poured onto soot marks. The container is covered with a lid and left alone for a couple of hours. After the time has passed, the pan is washed with a sponge and detergent. Aluminum products are especially well cleaned in this way. This method is not suitable for enamel cookware.
Baking soda is another effective method.
Soda is used if the methods listed above cannot be washed off. Soda poured onto the dark stain is left to stand for about 40 minutes, after which the burnt pan is easily washed off with a sponge.
Plain black tablets
Activated carbon tablets are suitable for pans made of any material. This method is especially effective if milk or jam is burnt. Three tablets of activated carbon, crushed into powder, are enough. This mixture is poured onto the soot and left for half an hour, after which cold water is poured into the container and kept in this state for another 40 minutes.
Another solution suitable for all types of containers. This product is universal; it eliminates contaminants due to the content of a large number of special compounds. It is enough to fill the burnt area with a couple of centimeters of serum and leave for a day. This manipulation should be enough to easily remove dirt even with an ordinary sponge and dishwashing liquid.
A mixture of soda and salt
Enameled and aluminum pans can be cleaned in a similar way. Soda and salt are mixed in equal proportions. The resulting mixture is poured onto the bottom of the pan, then water is added to it. The container is left in this state for a day, then the mixture can be removed and the pan boiled with warm water for half an hour.